LOCATION BURTONER MTEstablished Series
TAXONOMIC CLASS: Fine-loamy, mixed, superactive, frigid Typic Argiustolls
TYPICAL PEDON: Burtoner sandy clay loam, in rangeland (colors are for dry soil unless otherwise noted).
A--0 to 8 inches; grayish brown (10YR 5/2) sandy clay loam, very dark grayish brown (10YR 3/2) moist; weak medium and fine subangular blocky structure; soft, very friable, slightly sticky and slightly plastic; many very fine and few fine roots; many very fine and fine and few medium pores; 10 percent pebbles; neutral (pH 7.3); clear smooth boundary. (6 to 8 inches thick)
Bt1--8 to 14 inches; yellowish brown (10YR 5/4) sandy clay loam, dark yellowish brown (10YR 4/4) moist; moderate medium prismatic structure parting to moderate medium and fine subangular blocky; slightly hard, friable, moderately sticky and slightly plastic; many very fine and few fine roots; many very fine and few fine tubular and interstitial pores; many faint clay films bridging sand grains and common faint clay films on faces of peds; 10 percent pebbles; slightly alkaline (pH 7.5); clear wavy boundary.
Bt2--14 to 23 inches; yellowish brown (10YR 5/4) sandy clay loam, brown (10YR 4/3) moist; moderate medium and fine subangular blocky structure; slightly hard, friable, slightly sticky and slightly plastic; many very fine and few fine roots; many very fine and few fine tubular and interstitial pores; many faint clay films bridging sand grains and common faint clay films on faces of peds; 10 percent pebbles; neutral (pH 7.3); clear wavy boundary. (Combined thickness of Bt horizons is 8 to 24 inches).
Cr--23 to 28 inches; inlight brownish gray (2.5Y 6/2) decomposed granite bedrock (grus) that crushes to very gravelly loamy coarse sand; slightly alkaline (pH 7.4).
R--28 inches; hard granite bedrock.
TYPE LOCATION: Jefferson County, Montana; 2,400 feet north and 100 feet west of the SE corner of sec. 11, T. 5 N., R. 4 W.
RANGE IN CHARACTERISTICS:
Soil Temperature - 38 to 44 degrees F.
Moisture control section - between 4 and 12 inches.
Depth to the argillic horizon - 7 to 15 inches.
Depth to Cr horizon - 20 to 38 inches.
Depth to bedrock - 23 to 40 inches.
Surface stones or boulders - 0 to 15 percent
Some pedons have a thin transitional B horizon between the Bt and Cr horizons.
A horizon - Hue: 10YR or 2.5Y
Value: 3, 4 or 5 dry; 2 or 3 moist
Chroma: 1, 2 or 3
Texture: loam, coarse sandy loam, sandy loam or sandy clay loam
Clay content: 10 to 25 percent
Rock fragments: 0 to 60 percent--0 to 20 percent cobbles and stones, 0 to 40 percent pebbles
Reaction: pH 6.1 to 7.3
Bt horizons - Hue: 10YR or 2.5Y
Value: 4, 5 or 6 dry; 3 or 4 moist
Chroma: 2, 3 or 4
Texture: sandy clay loam or clay loam
Clay content: 20 to 30 percent
Rock fragments: 5 to 35 percent pebbles (mostly less then 7mm in diameter)
Reaction: pH 6.6 to 7.8
COMPETING SERIES:
Absarook (MT) - does not have a paralithic contact above the lithic contact; has horizons of secondary carbonate accumulation.
Beartooth (MT) - does not have a lithic contact above 60 inches.
Beeno (WY) - does not have a lithic contact above 60 inches.
Bielenberg (MT) - does not have a paralithic contact above 40 inches.
Bookcliff (UT) - does not have a lithic contact above 60 inches.
Bullflat (SD) - does not have a lithic contact above 60 inches.
Clancy (MT) - does not have a lithic contact above 40 inches.
Clasoil (MT) - does not have a lithic contact above 60 inches.
Cortyzack (CO) - does not have a lithic contact above 60 inches.
Dooley (MT) - has substratum of till that has bulk density of 1.55 and greater; does not have a lithic contact above 60 inches.
Empedrado (CO) - does not have a lithic contact above 60 inches.
Fairfield (MT) - does not have a lithic contact above 60 inches.
Farnuf (MT) - does not have a lithic contact above 60 inches.
Felor (SD) - does not have a lithic contact above 60 inches.
Greenway (SD) - does not have a lithic contact above 60 inches.
Gurney (SD) - has horizons of secondary carbonate accumulation; does not have a paralithic contact above the lithic contact.
Hangdo (UT) - does not have a lithic contact above 60 inches.
Hoppers (MT) - has a paralithic contact of semiconsolidated sandstone at 20 to 40 inches.
Hyalite (MT) - has a discontinuity of sandy-skeletal material above 40 inches and immediately below the argillic horizon; does not have a lithic contact above 60 inches.
Jeffcity (MT) - has a horizon of secondary carbonate accumulation.
Lefor (ND) - does not have a lithic contact above 60 inches.
Lininger (CO) - does not have a lithic contact above 60 inches.
Livona (ND) - does not have a lithic contact above 60 inches.
Martinsdale (MT) - does not have a lithic contact above 60 inches.
Maudlin (CO) - does not have a paralithic contact above the lithic contact; formed in residuum from sandstone.
Meagher (MT) - does not hve a lithic contact above 60 inches.
Moen (CO) - does not have a paralithic contact bove the lithic contact.
Pianohill (MT) - does not have a paralithic contact above the lithic contact; lithic contact consists of volcanic mudflow breccia.
Placerton (MT) - has horizon of secondary carbonate accumulation; does not have a lithic contact above 40 inches.
Reeder (ND) - does not have a lithic contact above 60 inches.
Reedwest (MT) - does not have a lithic contact above 60 inches.
Snakejohn (UT) - does not have a lithic contact above 40 inches.
Sponseler (AZ) -does not have a paralithic contact above the lithic contact; does not have aa lithic contact above 60 inches.
Trag (CO) - does not have a paralithic contact above the lithic contact; does not hve a lithic contact above 60 inches.
Trazumi (NM) - does not have a lithic contact above 60 inches.
Tschicoma (NM) - does not have a paralithic contact above a lithic contact; does not have a lithic contact above 60 inches.
Ulrant (WY) - has a horizon of secondary carbonate accumulation; does not have a paralithic contact over a lithic contact.
Vida (MT) - has substratum of till that has a bulk density of 1.55 and greater; does not have a lithic contact above 60 inches.
Watrous (ND) - does not have a paralithic contact over the lithic contact.
Wemple (MT) - does not have a paralithic contact over a lithic contact; does not have a lithic contact above 60 inches.
Williams (ND) - does not have a lithic contact above 60 inches.
Yegen (MT) - does not have a lithic contact above 60 inches.
GEOGRAPHIC SETTING:
Landform - hills, ridges and escarpments.
Elevation - 4,400 to 6,000 feet.
Slope- 2 to 60 percent.
Parent material - colluvium, alluvium and residuum derived from granite and other coarse grained igneous rocks.
Climate - long, cold winters; moist springs; warm summers.
Mean annual precipitation - 15 to 19 inches.
Mean annual air temperature - 36 to 42 degrees F.
Frost-free period - 70 to 105 days.
DRAINAGE AND PERMEABILITY: Well drained, moderate permeability.
USE AND VEGETATION: Burtoner soils are primarily used for rangeland, woodland and wildlife habitat. The potential native vegetation is mainly rough fescue, Idaho fescue, bluebunch wheatgrass, fringed sagewort, sticky geranium, Rocky Mountain juniper, bitterbrush and big sagebrush. Areas with a forest canopy have an overstory of ponderosa pine, Douglas-fir, limber pine, and an understory of Idaho fescue, bluebunch wheatgrass and Rocky Mountain juniper.
DISTRIBUTION AND EXTENT: Burtoner soils are of small extent in southwestern Montana.
MLRA OFFICE RESPONSIBLE: Bozeman, Montana
SERIES ESTABLISHED: Jefferson County, Montana, 1998.
REMARKS: Soil interpretation record: MT1556, MT3040. Diagnostic horizons and features recognized in this pedon are: a mollic epipedon from the soil surface to 8 inches (A horizon); an argillic horizon from 8 to 23 inches (Bt1 and Bt2 horizons); a particle size control section from 8 to 23 inches (Bt1 and Bt2 horizons); a layer of decomposed granite (grus) from 23 to 28 inches (Cr horizon); hard granite bedrock at 28 inches (R horizon). Burtoner soils have a frigid temperature regime and an ustic moisture regime.